Categories: Grilling
Ingredients
- 1 large ripe whole pineapple
- 1 pound BBQ pork ribs, meat removed from the bones
- 12 slices thick-cut bacon (see Cook's Note)
Directions
- Prepare a grill for medium indirect heat: For a gas grill (with 3 or more burners), turn all the burners to medium-high heat; after about 15 minutes turn off one of the middle burners and turn the remaining burners down to medium. For a charcoal grill, bank one chimney starter-full of lit and ashed-over charcoal briquettes to one side of the grill. Set up a drip pan on the other side to avoid flare-ups. (Be sure to consult the grill manufacturer’s guide for best results.)
-
Slice off the top and bottom of the pineapple with a sharp knife and set the pieces aside. Remove the peel from the pineapple, cutting it off in strips. Using a paring knife, carefully hollow out the pineapple to a 3/4-inch-thick shell.
-
Stuff the pineapple with the ribs. Place the top and bottom pieces back on the pineapple and secure them in place with 4 long bamboo skewers.
-
Place a large piece of parchment on your work surface. Arrange 6 slices bacon horizontally on the parchment. The edges of the slices should touch but not overlap. Working with the remaining 6 slices, weave the bacon in an over-under pattern by lifting alternating slices of the horizontal bacon and vertically placing a slice of bacon over or under as needed to create a woven lattice design. Wrap the bacon lattice around the pineapple and secure it in place with 8 long bamboo skewers. Trim the protruding skewer tips down to 1/2 inch lengths with kitchen shears.
-
Put the swineapple on the grill over the drip pan with the bacon seam-side down. Cover the grill and cook until the bacon is crispy and golden brown and the meat is hot in the center, about 1 hour. Transfer to a cutting board. Remove the skewers and slice the pineapple into rings for serving.